Antal inlägg : 21 Age : 31 Namn : Ralfs Från : Riga, Latvia Kör : Sierra Registration date : 14-12-14
Rubrik: Sv: Ralph - 2.9 ford sierra fre 29 apr 2016, 20:35
Hey guys! can you help me? What are those!!!! it's just that i have them empty ended and i have no idea what for are they! they just ley there in engine bay next to the battery. Can someone help? ty!
Henrik Skogenracing Sponsor
Antal inlägg : 1669 Age : 36 Namn : Henrik Från : land Kör : Nissan och Ford Registration date : 06-10-13
Rubrik: Sv: Ralph - 2.9 ford sierra fre 29 apr 2016, 22:17
Some years ago, but If I remember correct they are for DOHC "engine<> car interface". To provide constant and switched power to the DOHC engine harness and ECU, earth to fuel pump relay and also the tachometer signal go through there. I used them to wire in my 2.9 harness
Ralfs Skogenracing Small
Antal inlägg : 21 Age : 31 Namn : Ralfs Från : Riga, Latvia Kör : Sierra Registration date : 14-12-14
Rubrik: Sv: Ralph - 2.9 ford sierra sön 15 maj 2016, 18:40
Senast ändrad av Ralfs den sön 05 jun 2016, 21:20, ändrad totalt 1 gång
Ralfs Skogenracing Small
Antal inlägg : 21 Age : 31 Namn : Ralfs Från : Riga, Latvia Kör : Sierra Registration date : 14-12-14
Rubrik: Sv: Ralph - 2.9 ford sierra ons 18 maj 2016, 18:31
I finally got it to run!
but it seems the rpm are like 700 too much for a steady idle. what could be the problem?
Ralfs Skogenracing Small
Antal inlägg : 21 Age : 31 Namn : Ralfs Från : Riga, Latvia Kör : Sierra Registration date : 14-12-14
Rubrik: Sv: Ralph - 2.9 ford sierra tis 31 maj 2016, 20:00
Interior is starting to come back together!
Ralfs Skogenracing Small
Antal inlägg : 21 Age : 31 Namn : Ralfs Från : Riga, Latvia Kör : Sierra Registration date : 14-12-14
Rubrik: Sv: Ralph - 2.9 ford sierra lör 04 jun 2016, 11:25
AND I FUCKED UP! also the clutch is slipping, no clutch, cant push the pedal, it's hard like a rock and also i can put in gear while the engine is working... Took off the damn gearbox!
Ralfs Skogenracing Small
Antal inlägg : 21 Age : 31 Namn : Ralfs Från : Riga, Latvia Kör : Sierra Registration date : 14-12-14
Rubrik: Sv: Ralph - 2.9 ford sierra sön 02 okt 2016, 22:03
Hi, Have done few thing since i was here! Put in a new clutch from a 4.0 ford, finally shortened and balanced driveshaft, painted some interior bits black and took it out for a wash (no brakes no exhaust) , first time in a loooong time! HAD TO MAKE IT LOOK FRESH!
Randombastard Skogenracing Extreme
Antal inlägg : 404 Age : 35 Namn : Bobby Från : Landskrona Kör : Ford Sierra 2.0i Registration date : 14-09-17
Rubrik: Sv: Ralph - 2.9 ford sierra mån 03 okt 2016, 07:45
Awesome Ralph! keep it up!
Ralfs Skogenracing Small
Antal inlägg : 21 Age : 31 Namn : Ralfs Från : Riga, Latvia Kör : Sierra Registration date : 14-12-14
Rubrik: Sv: Ralph - 2.9 ford sierra ons 15 mar 2017, 10:55
Hi guys! Need your help, any advice on what could be the issue in this situation? It is warm, not cold and when I accelerate it chokes at 3200/3600rpm and yeah..
Ralfs Skogenracing Small
Antal inlägg : 21 Age : 31 Namn : Ralfs Från : Riga, Latvia Kör : Sierra Registration date : 14-12-14
Rubrik: Sv: Ralph - 2.9 ford sierra mån 10 jul 2017, 11:04
Hi Guys, Unfortunately vie come to a situation that I have to sell the car. I would be really happy to se the car go to an enthusiast, so fist I'm putting it up to sale in here. In short its an 1990 estate with a 2.9 5sp manual from ford scorpion. If it changes anything I did past the road inspection test in May, so its good for a year here in Latvia. What comes with the car : I have quite a few wheels, 15"x4, 16"x4 and 2x 16" 5 bolt wheels for angle kit(DIY scorpion supports where the rack mounting point is closer to center). 2 x diffs 1 is welded. Well I must have forgotten something but yeah. Here are some pictures:
It is not the prettiest car, however it is all welded up ( floor wise) and I'm asking 1.500 EUR for. Location vise - Riga, Latvia So if you're interested or have any questions hit me up.
Hem 
Sök 
fre 29 apr 2016, 20:35
